News

As the fiber laser cutting machine officially emerged in 2011, the fiber laser cutting machine gradually occupied the entire cutting market with the trend of rapid development in the following years, and replaced the traditional CO2 laser cutting technology. As of 2015, the fiber laser cutting machine has been continuously upgraded in power, and the 6000W fiber laser cutting equipment has also come out, which can meet the processing of most metal materials. In recent years, Wuhan bcxlaserCNC is also continuously carrying out fiber laser cutting. Upgrading, continuous upgrading on the basis of 3000W, 6000W and higher power fiber laser cutting machines also came into being, but many people may not understand the difference between 6000w and 3000w fiber laser cutting machines, today we will use 6000W and 3000W Fiber laser cutting machine conducts a comprehensive comparative analysis.

Carbon Steel Bright Cut

From the analysis of the cutting thickness of the fiber laser cutting machine, the bright surface cutting thickness of the 3000W fiber laser cutting machine is about 10MM; compared with the 3000W fiber laser cutting machine, the bright surface cutting thickness of the 6000W fiber laser cutting machine is much larger than that of the 3000W fiber laser cutting machine. Machine, its bright surface thickness is less than 16MM can be cut, and the cutting speed is fast, and the verticality is good.

Full power cutting of carbon steel

Full power cutting is 100% power cutting. The 6000W fiber laser cutting machine has the advantages of good electro-optical conversion efficiency, high beam quality and high power density. In actual operation, because the 6000W fiber laser cutting machine has full power cutting It has the advantages of fast cutting speed and small taper, so carbon steel materials with a thickness of 16-25mm can be cut with a 6000W fiber laser cutting machine.

stainless steel cutting

Compared with the 3000W fiber laser cutting machine, the 6000W fiber laser cutting machine conforms to the safety standards of laser equipment in developed countries in Europe and America, and adopts laser beam cutting. Compared with the 3000W fiber laser cutting machine, the cutting speed of the 6000W fiber laser cutting machine can be increased by 140%~330% %, which can effectively improve work efficiency.

Burr-free cutting

The commonly used laser cutting machines use oxygen or nitrogen for operation. When the cross-section requirements are not high, the fiber laser cutting machine can also use air for cutting, and the air is compressed into the storage tank by the air compressor. The filter cooler can be used after cooling and drying, which can effectively reduce the user's use cost.

In the same brand of fiber laser cutting machine, 3000W laser cutting machine can cut 2.5mm thick carbon steel and 10mm stainless steel material without burr; on the other hand, 6000W can cut 5mm thick carbon steel and 16mm stainless steel material without burr, in the same brand , In the same type of fiber laser cutting machine, the thickness of the material that can be processed by the 6000W laser cutting machine is far greater than that of the 3000W laser cutting machine.

With the continuous development and upgrading of Wuhan bcxlaserCNC fiber laser cutting machine, now the cutting power of bcxlaserfiber laser cutting machine has far exceeded 6000W, and the cutting power of large-format gantry plane laser cutting machine equipped with fiber laser can reach 30000W , and the processing range that can be extended infinitely, the machine tool guide rail is infinitely extended, and multiple sheets are cut synchronously, which is suitable for large-format, medium and thick sheet batch processing.